Richard Thompson - BBC Studios

Recording Date 7/27/2007

Rock/Pop

Files, 4 Tracks, 14:29 Length


01	I Want To See The Bright Lights Tonight	Richard Thompson	02:30
02	Needle And Thread	Richard Thompson	03:27
03	Down Where The Drunkards Roll	Richard Thompson	04:07
04	Dad's Gonna Kill Me	Richard Thompson	04:25

Product Details
Venue	BBC Studios
City, State/Country	London, England
Packaging	MP2
Live	Yes
Sound	Stereo

Musicians & Credits
Guitar	Richard Thompson

Personal Details
Index	# 3433
Owner	Dave

User Defined
Purchased	ROIO
ROIO Source	FM

Richard Thompson
27th July, 2007
BBC Studios, London, UK

Broadcast by BBC 6Music on 10th December 2007 "Live at 4" series

**[BBC 6Music is a digital only broadcast with no FM transmission. Bit rate on DAB radio is 128kbps, DVB-T and Digital Satellite 160kbps. Older archived recordings may have been transmitted on BBC FM stations in the past and FM recordings may exist. Please post torrents of these if they exist as upgrades to these digital recordings which will then be removed. As these are lossy radio transmissions they have not been bloated to flac, following DIME guidelines.]**

DVB-T (160kbps / 48Khz) > Nebula DigiTV > Hard Disk MP2 > mp3DirectCut

Tracks
01 I Want To See The Bright Lights Tonight
02 Needle And The Thread
03 Down Where The Drunkards Roll
04 Dad's Gonna Klill Me

; wholefile md5 checksum file generated by Trader's Little Helper
; generated on December 11, 2007, at 5:27 pm

036c26c3b0a7c8d1cfb57d04d06f0ddf *01.mp2
7a91d5cb5bad45d7c6ee9a85c1b96878 *02.mp2
510dbb84e7c208b6137f8a21e5017e21 *03.mp2
f381dd2a2b6fd58c764321973a73a931 *04.mp2

Instructions (With thanks to hamhen)

QUOTE:
Please do not use the dbpoweramp software to transcode the mp2 files to .wav. The transcoding process leads to a noticeable decrease of the sound quality!
For transcoding the .mp2 file I recommend the freeware BeSweet/ BeLight (if you use a Windows PC Ihave to add) : http://www.free-codecs.com/download/BeLight.htm
Both are .zip-files; unzip BeSweet first into a folder. Then you should unzip BeLight into the same folder. This done, you can start the software by clicking on the BeLight symbol in the folder. The software is easy to work with, I think; choose the register card "WAV/ PCM". Do not check any of the boxes on the left except the one for "Output Sampling Rate" (this should be 44100hz), and on the right please choose "wav" (under "Output Format") and "16 bits stereo wav" under "Output Channels".

Put the mp2 file into the window on top and click on the "Start Processing" below. The transcoding process will start immediately.

If BeLight does not work with your computer you should try a software named Switch. It is available for free at http://www.nch.com.au/switch/plus.html
There are versions for Windows and Mac.